Galvanized Flat Steel Guy Wire Pole Band for Utility Poles
The galvanized flat steel guy wire pole band is a pole-line fitting used to establish a mechanical attachment point for guy-wire and pole-support assemblies. Formed flat-steel sections fit around the external surface of a round utility pole and are secured through bolted connection lugs.
The band transfers the force from the guy attachment into the pole structure. Depending on the approved design, the guy wire may be connected through an extended lug, eye hole, shackle, clevis, thimble or another compatible fitting. The pole band itself does not directly grip the steel guy strand.
Flat steel guy bands can be manufactured for concrete, wood or steel poles. Pole diameter, band width, steel thickness, bolt spacing and attachment-point configuration are produced according to the customer’s pole dimensions and mechanical requirements.
Important: The completed guying system must be selected according to the pole design, guy-wire size, installation angle and required mechanical load. A rated strength must not be stated without an approved drawing and corresponding mechanical test report.
Key Features
- Formed flat-steel construction for round utility poles
- Bolted split-band structure for mechanical installation
- Provides an attachment point for pole guying assemblies
- Available with extended lugs, eye holes or custom connection plates
- Custom inside diameter to match the pole installation position
- Multiple steel widths and thicknesses available
- Hot-dip galvanized finish available for outdoor corrosion protection
- Suitable for overhead power and telecommunications infrastructure
- Dimensions, bolt assemblies and packaging can be customized
Typical Technical Specifications
| Product Type | Flat Steel Guy Wire Pole Band |
|---|---|
| Configuration | Split circular band with bolted connection lugs |
| Base Material | Carbon steel, subject to the approved drawing |
| Pole Shape | Round |
| Pole Compatibility | Concrete pole, wood pole or steel pole |
| Band Inside Diameter | Customized according to the pole diameter at the installation position |
| Flat Steel Width | Customized |
| Flat Steel Thickness | Customized |
| Fastening Method | Bolted connection |
| Guy Attachment | Extension lug, eye hole, clevis or project-specific interface |
| Surface Finish | Hot-dip galvanized or project-specified zinc coating |
| Application | Guy-wire attachment and utility-pole support systems |
| Customization | Diameter, width, thickness, bolt size, lug structure, coating and marking |
All dimensions and mechanical ratings must be confirmed using the approved product drawing. The photograph does not establish the actual pole diameter, steel thickness, bolt size or rated strength.
Product Construction
The pole band is normally fabricated from one or more formed flat-steel sections. The steel is bent to match the curvature of the pole, while the ends are formed or welded with connection lugs. Bolts pass through the corresponding lug holes to close and tighten the band around the pole.
An extended attachment lug may be incorporated into the band for connection to the guy assembly. The shape, hole diameter and orientation of this lug must match the adjoining shackle, clevis or other connection fitting.
Available Configurations
Two-Piece Split Pole Band
Two formed half-bands are assembled around the pole and connected at both sides. This structure allows installation without passing the band over the top of the pole.
Single-Point Guy Attachment Band
The band includes one extended lug or attachment plate for connecting a single guy-wire assembly.
Custom Multi-Point Pole Band
Additional lugs or connection holes can be incorporated when the approved pole design requires more than one attachment direction.
Surface Treatment
Hot-dip galvanizing is commonly specified for outdoor pole-line hardware because it provides a protective zinc coating over the fabricated steel surface. When ISO 1461 is specified, coating appearance, thickness and adhesion requirements must be verified for the finished product.
Zinc coating should be applied after forming, drilling and welding whenever required by the production specification. Damaged coating, uncoated weld areas, excessive zinc accumulation and sharp projections should be rejected or repaired according to the agreed inspection procedure.
Applications
- Overhead distribution-line pole guying
- Concrete utility-pole support systems
- Wood and steel pole attachments
- Telecommunications and lighting poles
- Rural electrification projects
- Pole reinforcement and stabilization assemblies
- Utility infrastructure and line-extension projects
Installation Guidance
- Measure the actual pole diameter at the specified installation height.
- Confirm that the band curvature and inside diameter match the pole.
- Inspect the band, welds, holes, bolts and zinc coating before installation.
- Position the attachment lug in the direction shown on the approved pole drawing.
- Install the corresponding band sections around the pole.
- Insert the specified bolts, washers and nuts.
- Tighten the bolts evenly to avoid tilting or uneven contact.
- Connect the guy assembly using the specified clevis, shackle or compatible fitting.
- Inspect the complete assembly after the guy wire has been tensioned.
Do not force an undersized band onto the pole or use an oversized band with inadequate surface contact. Installation and guy-wire tensioning must be performed by qualified personnel.
Quality Inspection
- Steel material and dimensional inspection
- Band inside diameter and curvature inspection
- Flat-steel width and thickness inspection
- Connection-hole position and diameter inspection
- Weld appearance and continuity inspection
- Bolt and nut assembly inspection
- Zinc-coating appearance and thickness inspection
- Mechanical proof or ultimate-load testing when specified
- Marking, quantity and packaging inspection
Reference Standards
- IEC 61284:1997 – Requirements and tests for overhead-line fittings, when contractually applicable
- ISO 1461:2022 – Hot-dip galvanized coatings on fabricated iron and steel articles
- Approved utility drawings and project-specific mechanical requirements
- Applicable local overhead-line construction regulations
Reference to a standard does not constitute certification. Compliance must be supported by inspection or test documentation for the exact product model.
Ordering Information
Please provide the following information when requesting a quotation:
- Pole material and pole shape
- Pole diameter at the installation position
- Required band width and steel thickness
- Number and position of guy attachment points
- Attachment-hole diameter and connection direction
- Bolt diameter, length and strength grade
- Required mechanical load or test requirement
- Surface-treatment and zinc-coating requirement
- Required drawings, inspection reports and certificates
- Order quantity and packaging requirement
Frequently Asked Questions
Does the pole band directly clamp the guy wire?
No. The band provides a mechanical attachment point on the pole. The guy strand is normally terminated using compatible guy fittings and connected to the band’s lug or eye.
How is the correct band diameter selected?
Measure the pole diameter at the actual installation height. Tapered poles may have different diameters at different positions.
Can it be used on concrete poles?
Yes, when the band diameter, contact profile, mechanical capacity and connection structure match the approved concrete-pole design.
Are bolts included?
Bolts, nuts and washers can be supplied with the pole band. Their dimensions, grade and coating must be stated in the quotation and packing list.
Can the pole band be customized?
Yes. Inside diameter, steel width, thickness, bolt holes, attachment lugs, coating, marking and packaging can be manufactured according to an approved drawing.
