The Jiujin Secondary Swinging Clevis is an essential pivot and connection component designed for the dynamic loads and flexibility demands of overhead power distribution systems. Manufactured from forged high-tensile steel and protected by a heavy-duty hot-dip galvanized coating, this clevis provides exceptional resistance to corrosion and mechanical stress. Its unique swinging design allows for a degree of articulation, accommodating line movement caused by wind, temperature changes, and load variations without transferring excessive torque to the pole structure. Produced directly at our Hebei factory, this clevis guarantees the durability, reliability, and performance required for critical secondary circuit applications.<\/p>\n
| \u00d6zellik \/ Tip<\/th>\n | Jiujin Electric Power Taraf\u0131ndan Sunulan \u00d6zellikler ve Se\u00e7enekler<\/th>\n<\/tr>\n<\/thead>\n | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Model\/Tip<\/strong><\/td>\n| SC-12, SC-16, SC-20 (or other factory-specific model numbers denoting pin diameter in mm)<\/td>\n<\/tr>\n | Malzeme<\/strong><\/td>\n | Forged High-Tensile Carbon Steel (Q235B, Q345B or equivalent)<\/td>\n<\/tr>\n | Standart<\/strong><\/td>\n | Designed to meet ASTM A153, IEC 61284, or relevant GB standards.<\/td>\n<\/tr>\n | Kaplama\/Bitirme<\/strong><\/td>\n | S\u0131cak Dald\u0131rma Galvaniz<\/strong>\u00a0(Standard coating thickness: \u226555\u00b5m)<\/td>\n<\/tr>\n | Pin Diameter<\/strong><\/td>\n | Sizes to accommodate various pin diameters (e.g., 12mm, 16mm, 20mm).<\/td>\n<\/tr>\n | Y\u00fck Derecesi<\/strong><\/td>\n | Rated for mechanical loads typical of secondary distribution lines (e.g., 12kN, 16kN, 24kN).<\/td>\n<\/tr>\n | Paketleme<\/strong><\/td>\n | Bulk in cartons or wooden crates, with components often packaged with matching pins and washers.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n | Kullan\u0131m Uygulamalar\u0131<\/strong><\/h4>\nSecondary Power Distribution:<\/strong>\u00a0Primarily used to connect and suspend strain insulators, transformers, and other hardware to poles in the medium-voltage (secondary) distribution network.<\/p>\n<\/li>\n Flexible Connections:<\/strong>\u00a0Ideal for dead-end corners, section poles, and anywhere a flexible, articulated connection is needed to absorb mechanical forces.<\/p>\n<\/li>\n Pivoting Points:<\/strong>\u00a0Serves as a crucial pivot point for equipment that requires movement, preventing hardware damage and maintaining line integrity.<\/p>\n<\/li>\n Telekom\u00fcnikasyon Hatlar\u0131:<\/strong>\u00a0Used in similar flexible anchoring applications for communication cable support systems.<\/p>\n<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":" |